Physician-led care in Mission Hills and La Jolla

Evaluation

What Happens in a Body Composition Analysis in La Jolla?

Calm clinic corridor with warm wood and soft daylight

A body composition analysis estimates how your body weight divides into fat mass, fat-free mass and body water. At SDBody, we list body composition analysis in Assess, the first step of the evaluation at our La Jolla clinic, and a clinician reviews the result with your goals, symptoms, history and lab results.

Bioelectrical impedance analysis, often shortened to BIA, passes an alternating electrical current through the body and measures how strongly the body opposes it. Fluid-rich tissue conducts that current and fat resists it, so the reading can be turned into estimates of body water, fat-free mass and fat mass.

A scan result is an estimate built on assumptions, and the way it is taken changes how much weight it can carry. This guide covers what the analysis measures, how the technology works, what to expect at the La Jolla clinic and how results fit with lab work.

If you would rather talk it through with a clinician, you can book a consultation online and choose the La Jolla clinic.

What does a body composition analysis measure?

A body composition analysis breaks body weight into parts instead of giving one number on a scale. Bioimpedance devices commonly report fat mass, fat-free mass, an estimate of skeletal muscle and total body water. Multifrequency devices also estimate the water outside cells and, from the difference, the water inside cells.

Fat-free mass is the part of your weight that is not fat. A 2021 narrative review in the journal Nutrients describes this level of body composition as “the fat mass and fat-free mass that embed total body water and bone mineral content.”

Muscle is the largest water-rich tissue inside that fat-free share. A 2026 methods guide describes skeletal muscle as “the largest hydrated tissue compartment” in the body, which is why it shapes the reading more than any other tissue.

Body water gets its own line on the report because it is the part the device actually responds to. The next section explains why.

How does bioelectrical impedance estimate body composition?

Bioelectrical impedance measures how strongly the body resists an alternating electrical current. Fluid-rich tissue such as skeletal muscle conducts the current well, while fat and bone resist it, so the reading mostly reflects body water. Software then uses prediction equations to turn that reading into estimates of fat-free mass and fat mass.

Body water carries the current

Two runners on a sunlit dirt path, seen from behind

A 2026 methods guide in The American Journal of Clinical Nutrition, developed by an international panel, explains that tissues low in electrolyte-containing fluid, such as fat and bone, “are poor conductors of electricity.” Fluid-rich tissue such as skeletal muscle conducts more easily.

The guide adds that whole-body resistance “primarily reflects the volume and distribution of electrolyte-containing fluids.” A peer-reviewed study of athletic young adults, archived in the National Library of Medicine’s PubMed Central, puts it more simply: “BIA measures the impedance, or resistance, to an electrical current that travels through the water in muscle and fat.”

Prediction equations turn readings into estimates

The device does not see fat or muscle directly. The same methods guide states that these methods “measure tissue electrical impedance/conductance properties rather than body components directly,” with fat mass derived indirectly through prediction equations.

That is why the guide calls the body composition numbers “model-based outputs that depend on underlying assumptions.” Accuracy depends on the device, its software and equations, and how closely a person matches the group the equation was built on, and the guide notes that individual-level error “can be substantial.”

A single figure is therefore better read as an estimate with a margin around it.

Segmental readings for arms, legs and trunk

Some analyzers measure body segments separately. The methods guide describes segmental analysis that represents the body as “5 cylinders corresponding to the limbs and trunk,” and reports that one 8-electrode multifrequency device outperformed a 4-electrode wrist-and-ankle setup for whole-body skeletal muscle estimates in healthy adults.

It also cautions that segmental readings “may compound errors in body composition estimates depending on the measurement approach and equations used.”

What happens during a body composition analysis at SDBody La Jolla?

At our La Jolla clinic, body composition analysis is part of Assess, the first step of the evaluation, alongside intake, diagnostics and biomarkers. Some analyzers have you stand on foot electrodes and hold hand electrodes with your arms away from your body while they take a reading. A clinician then reviews the estimates with your other results.

The four-step evaluation at our La Jolla clinic runs Assess, Strategize, Optimize and Evolve. Assess covers “comprehensive intake, diagnostics, biomarkers, and body composition analysis,” and Strategize is where a clinician interprets labs and evaluates goals and symptoms.

If this is your first appointment, our walkthrough of what happens at your first visit covers the intake, the lab draw, the consultation and the plan.

Conditions on the day can shift a reading. The 2026 methods guide lists “recent food or fluid intake, exercise, and circadian variation” among factors that can affect accuracy. The 2021 Nutrients review names body position, previous exercise and diet as factors that should be standardized.

Ask our team about preparation when you book. If you plan to compare scans, keeping those conditions the same each time makes the comparison fairer.

Tell the clinician before a scan if you have an implanted cardiac device, such as a pacemaker or defibrillator. A 2025 systematic review in Heart Rhythm O2, covering six studies and 531 participants, found no reported device interference with clinical-grade analyzers. Both that review and the 2026 methods guide still describe safety in this group as an area that needs more evidence, and the review says its findings do not apply to consumer wearables.

Pregnancy and metal implants are also worth raising. The methods guide notes that bioimpedance during pregnancy “cannot differentiate between maternal and fetal tissues,” and that metallic implants may limit the validity of a reading, so their presence should be documented and results interpreted with caution.

How are body composition results read alongside lab work?

Body composition results are read as one input among several. A clinician looks at them together with lab results, symptoms, history and goals, because a scan estimate and a blood marker describe different parts of the picture. Our guide to who biomarker testing may suit covers when blood testing makes sense. We do not present lab testing as a diagnosis on its own, and a scan estimate deserves the same caution.

Raw readings and model-based estimates

The methods guide recommends treating raw measurements such as resistance and reactance as “primary data,” and the body composition numbers as model-based outputs.

It also warns that substantial differences between scans “may reflect violations of assumptions or inconsistencies in measurement procedures and conditions rather than true physiological change.” A shift in an estimate is a reason to look closer before drawing conclusions.

Consistent conditions over time

Bioimpedance measurements are “highly repeatable under standardized conditions,” according to the guide, when time of day, body position, hydration status, fasting status and environment are controlled.

For comparisons over time, it recommends the same device, identical electrode type and placement, the same analysis mode and ideally the same prediction equation. Switching, it warns, “may introduce artificial changes that do not reflect true physiological variation.”

Labs and symptoms in the same conversation

For blood testing at our La Jolla clinic, a clinician reviews results “against your symptoms, your history, and the medications you already take.” Testing comes in three panels, Hormone, Core and Advanced, and may cover hormone, thyroid, metabolic and other markers depending on your goals and symptoms.

If you have been told everything looks normal and you still feel off, our post on why normal labs can still leave you feeling off explains how reference ranges are read.

Body changes that do not match your habits are one of the five signs of hormonal imbalance our La Jolla clinicians hear about most. A body composition estimate can sit alongside that conversation as one more data point.

Where to start with a body composition analysis in La Jolla

Start with the question you want answered, whether that is strength, energy or body changes your habits do not explain. A scan estimate then has a clear job inside a wider evaluation.

At SDBody, care begins with an evaluation, not a product. If care is appropriate, a clinician explains the plan, the alternatives, the risks and how it will be monitored.

To ask about body composition analysis at our La Jolla clinic at 7710 Fay Ave, call (858) 401-2383.

Care is provided under physician supervision. Information on this page is general and is not medical advice. Individual results vary.

Frequently Asked Questions

What happens in a body composition analysis in La Jolla?

At our La Jolla clinic, body composition analysis is part of Assess, the first step of the evaluation, alongside intake, diagnostics and biomarkers. A bioimpedance scan measures how your body resists an alternating electrical current and estimates fat mass, fat-free mass and body water. A clinician then reviews the result with your goals, symptoms, history and lab results.

Is bioelectrical impedance analysis accurate?

Bioimpedance measurements are highly repeatable under standardized conditions, but the body composition numbers are estimates from prediction equations. A 2026 methods guide in The American Journal of Clinical Nutrition notes that individual-level error can be substantial. Results should be read with care and alongside other clinical information.

Do I need to prepare for a body composition scan?

Recent food or fluid intake, exercise and time of day can all affect a reading, according to published research. Ask our team about preparation when you book. If you are comparing scans, keep those conditions the same each time.

Can I have a bioimpedance scan with a pacemaker or during pregnancy?

Tell the clinician first. Studies of clinical-grade analyzers in people with pacemakers or defibrillators have not reported device interference, but safety in this group still needs more evidence. In pregnancy, bioimpedance cannot separate maternal and fetal tissue, which limits what the numbers mean.

Does a body composition analysis replace lab testing?

No. A scan estimates fat mass, fat-free mass and body water, while lab panels may cover hormone, thyroid, metabolic and other markers. A clinician reviews both in context, and we do not present lab testing as a diagnosis on its own.

Is body composition analysis part of the evaluation at SDBody La Jolla?

Yes. Our La Jolla clinic lists body composition analysis in Assess, the first step of the evaluation, alongside intake, diagnostics and biomarkers. A clinician then reviews the estimates with your goals, symptoms, history and lab results.


Keep reading

More from the clinic

Questions patients ask

Is this medical advice?
No. These articles are educational. Evaluation and any treatment differ by person, and a clinician reviews your history, symptoms and results before recommending anything.
How do I start?
Book a consultation. Your first visit is a conversation about your goals and symptoms, and the clinician decides whether testing is appropriate.